DataKeeper for Windows All Documentation - SIOS

ISBREAKUSERREQUESTEDMirror Type = ASYNCHRONOUSLY------------------------------------LEVEL 3 INFO-------------------------------->> Remote [0} = 10.1.1.133, F:No Resync or CompVol Statistics to report>> Remote [1] = 10.1.1.134, F:No Resync or CompVol Statistics to reportISBREAKUSERREQUESTEDEMCMD ISBREAKUSERREQUESTED This command checks whether a broken mirror is a result of a user request. The command may only be run onthe local system. The parameters are:This should be the local system. The drive letter of the volume that you want to check.Output:TRUEFALSEThe mirror was broken because of a user request.The mirror was broken by SteelEye DataKeeper (e.g., network failure, failure to write dataon target side, etc).The volume is not in a BROKEN (3) state.ISPOTENTIALMIRRORVOLEMCMD ISPOTENTIALMIRRORVOL This command checks to determine if a volume is a candidate for mirroring. The command may only be run onthe local system. The parameters are:This should be the local system. The drive letter of the volume that you want to check.Output:TRUE - The volume is available for mirroring.Otherwise, the output may be some combination of the following:System DriveDataKeeper for Windows Technical DocumentationPage 81