DataKeeper for Windows All Documentation - SIOS

GETSERVICEINFONumberofBlocks : 32831DirtyBlocks : 2124CurrentBlock : 29556NewWrites : 0ResyncStartTime: Fri Nov 05 15:09:47 2008LastResyncTime: Fri Nov 05 15:09:47 2008The ResyncPhase is used internally and has little meaning outside of the development environment. Thevalues are: 0 (unknown), 1 (initial), 2 (update), and 3 (done).The BitmapPass is the number of times we have passed through the bitmap indicating the number of dirtyblocks. We count from zero. If we do a resync in one pass, then this never increments.The NumberOfBlocks is the number of 64K data blocks on the volume.The DirtyBlocks parameter is the number of blocks that the bitmap indicates need to be updated (and havenot already been).The CurrentBlock parameter indicates the current location in the bitmap.The NewWrites parameter indicates the number of writes that have occurred on the volume since we havebeen resyncing.The ResyncStartTime and LastResyncTime parameters describe the time that the resync was begun andthe last time a resync write operation was sent across the network.GETSERVICEINFOEMCMD GETSERVICEINFOThis command retrieves version and other information about the SteelEye DataKeeper service and driver thatis running on the specified machine. The parameters are: This can be either the source or the target systems.Sample output:Service Description: = SteelEye DataKeeper ServiceService Build Type: = ReleaseService Version = 7.0Service Build = 1DataKeeper for Windows Technical DocumentationPage 77