DataKeeper for Windows All Documentation - SIOS

TargetPortBase *Specifies the maximum number of resync passes before SteelEye DataKeeper will give up trying to resynchronizethe mirror while there is traffic on the source volume. In every pass, SteelEye DataKeeper marksthe volume blocks that were written to during the pass. In the next pass, it will send to the target only themarked blocks.TargetPortBase *Location: HKEY_LOCAL_MACHINE\SYSTEM\\Services\ExtMirr\Parameters\TargetPortBaseName Type Default DataTargetPortBase REG_DWORD 10000Specifies the base TCP port number for target volume connections. This number may need to be adjustedif the default port is used by another service or is blocked by a firewall. The actual port that the target listenson is calculated as follows:Port = TargetPortBase + (Volume Letter - A:)For example:TargetPortBase = 10000Volume Letter = HPort = 10000 + (H: -A:) = 10007TargetPortIncr *Location: HKEY_LOCAL_MACHINE\SYSTEM\\Services\ExtMirr\Parameters\TargetPortIncrName Type Default DataTargetPortIncr REG_DWORD 256Specifies the increment to the base TCP port number. This is used only when a TCP port is found to be inuse. For example, if the target is attempting to listen on port 10005 and that port is in use, it will retry listeningon port 10005 + TargetPortIncr.DataKeeper for Windows Technical DocumentationPage 48