DataKeeper for Windows All Documentation - SIOS

DescriptionFailed to create the mirror.Event Id: 137System Event LogUnable to initialize mirror on the target machine.Volume Device:Source Volume: ETarget Machine: 10.17.103.135Target Volume: EFailed operation: Target reports errorError Code: 0xC0000055DescriptionDataKeeper cannot lock the Target volume during mirror creation.Suggested Action1. Verify the Distributed Link Tracking Client service is not running on either system.2. Stop any other processes that may prevent DataKeeper from locking the Target volume (e.g. anti-virussoftware).3. Recreate the mirror.User Interface - Shows Only One Side of the MirrorIf the SteelEye DataKeeper UI shows a volume as a source and its corresponding target as available or avolume as a target with the corresponding source volume as available, you can use the command line utility toforce an update to the SteelEye DataKeeper GUI or delete the orphaned side of the mirror. From a commandprompt, go to the SteelEye DataKeeper directory on the server which is displaying unexpected mirror statusand perform the following steps:1. Make sure that the mirror is not in a Paused or Broken state on the source. If so, continue the mirroron the source. This should result in the mirror being re-established to the target.2. Run EMCMD UpdateVolumeInfo Where is the name of the system; is the letter of the volume.3. If the problem is not resolved in Step 1, then stop and restart the SteelEye DataKeeper service.Windows Server 2012 Specific IssuesFor issues related to Windows Server 2012, see the following topics:DataKeeper for Windows Technical DocumentationPage 167