DataKeeper for Windows All Documentation - SIOS

RESTARTVOLUMEPIPEWriteQueueLowWaterDontFlushAsyncQueueTarget system (changes take effect the next time the source and target systems reconnect):TargetPortBaseTargetPortIncrRESTARTVOLUMEPIPEEMCMD RESTARTVOLUMEPIPE This command is for internal use only.RESYNCMIRROREMCMD RESYNCMIRROR []This command forces the mirror to be fully resynced. The parameters are: This is the source system name.This is the drive letter of the mirror that should be resynced.This is the IP address of the target system of the mirror to resync. This optional parameter maybe used if multiple targets are associated with the mirror. If not specified, a resync to all targetswill be performed.SETASR_OKEMCMD SETASR_OK []This command sets the Automatic Split-brain Recovery OK flag to TRUE.If a target_ip is specified, the flag is set to TRUE for that mirror. If no target_ip is specified, the flags for allmirrors of the specified volume that are in the Mirroring state - or in the Paused state, withBreakUserRequested = FALSE - are set to TRUE. This command is only valid on a mirror Source system.The Automatic Split-brain Recovery OK flag is for internal DataKeeper use only - it is not expected that a userwould need to execute this command.The parameters are:Source system only Drive letter of the mirrored volume[]IP address of the Target systemDataKeeper for Windows Technical DocumentationPage 84