DataKeeper for Windows All Documentation - SIOS

GETSNAPSHOTLOCATIONDriver Version = 7.0Driver Build = 1Volume Bit Map= 1000070hService Start Time = Fri Oct 06 11:20:45 2008Last Modified Time = Fri Oct 06 15:11:53 2008GETSNAPSHOTLOCATIONEMCMD GETSNAPSHOTLOCATION This command retrieves the currently configured snapshot location (directory path) for the given volume on thegiven system. It will return an empty result if the snapshot location is not configured on the given volume.The parameters are:This is the system name/IP address of the system containing volume to be snapshotted. This is the drive letter of the volume to be snapshotted.Sample output:C:\TempWhen the command is successful, it will report the snapshot directory path on stdout, which will be empty ifsnapshot location is not yet configured.GETSOURCEMIRROREDVOLUMESEMCMD GETSOURCEMIRROREDVOLUMESThis command displays information about the volumes on the system that are currently the source in a mirror.Sample output:Status = 0Source Volume = F:Source Label= New VolumeSource #Targs = 2Target 0Target System = 10.1.1.133Mirror State = 0001DataKeeper for Windows Technical DocumentationPage 78