DataKeeper for Windows All Documentation - SIOS

GETTARGETMIRROREDVOLUMESTarget 1Target System = 10.1.1.134Mirror State = 0001GETTARGETMIRROREDVOLUMESEMCMD GETTARGETMIRROREDVOLUMESThis command displays information about the volumes on the system that are currently the target in a mirror.Sample output:** Calling GetTargetMirroredVolumes **Returned 1 Target VolumesTarget Volume 1 information:Volume Root = F:Volume State = 1Source = 10.1.1.132Target = BLUEJAYGETVOLUMEDRVSTATEEMCMD GETVOLUMEDRVSTATE This command retrieves the current state of the SteelEye DataKeeper device driver.The parameters are:This can be either the source or the target systems. The drive letter of the volume you want to get the configuration on.The output is a number indicating the state. The output is purposely terse as it is designed to be parsed in aDataKeeper recovery script. The output is one of the following mirror states:-1: Invalid State0: No mirrorDataKeeper for Windows Technical DocumentationPage 79