DataKeeper for Windows All Documentation - SIOS

SourceDriveLetterSpecifies the drive letter of the volume on the target side at the time of a mirror creation or continue. Thisvalue is the Unicode representation of the drive letter.This value is written by the driver during a mirror creation or continue operation and is present forinformational purposes only. The driver does not read this value.Note: It is possible for drive letters to change while the system is running. This can be done by using theDisk Management utility and other methods. This value is only accurate as of the last mirror create orcontinuation.WARNING: THIS VALUE SHOULD NOT BE CHANGED BY THE USER.SourceDriveLetterLocation: HKEY_LOCAL_MACHINE\SYSTEM\\Services\ExtMirr\Parameters\Volumes\{VolumeGUID}\Targets\{TargetIP}\SourceDriveLetterName Type Default DataSourceDriveLetter REG_BINARY None (Do NOT Modify)Specifies the drive letter of the volume on the source side at the time of a mirror creation or continue. Thisvalue is the Unicode representation of the drive letter.This value is written by the driver during a mirror creation or continue operation and is present forinformational purposes only. The driver does not read this value.Note: It is possible for drive letters to change while the system is running. This can be done by using theDisk Management program and other methods. This value is only accurate as of the last mirror create orcontinuation.WARNING: THIS VALUE SHOULD NOT BE CHANGED BY THE USER.MirrorStateLocation: HKEY_LOCAL_MACHINE\SYSTEM\\Services\ExtMirr\Parameters\Volumes\{VolumeGUID}\Targets\{TargetIP}\MirrorStateName Type DataDataKeeper for Windows Technical DocumentationPage 60