SP-2000/X-Y AutoCam™ Pedestal - Vinten Radamec

SP-2000/X-YSafety & IntroductionSafety IssuesSafety issues including important warnings, risks and related topics are coveredin this section of the manual. It is very important that this information be availableto all personnel who will work on or near the Autocam equipment.Pedestal E-STOP Switches3 EMERGENCY STOP switches are located on the top ofeach pedestal base. Make sure that all personnel are aware ofthe location and operation of these pedestal E-STOP switchesand the main pedestal power down switch before operatingthe equipment. Press down firmly on any one of the E-STOP switches toimmediately disable the pedestal and head.Emergency STOP Switches(1 hidden)Pedestal Off SwitchThe Off Switch can also be used, but only if the operator can press it quicker thatthan one of the E-STOP switches.After clearing the cause for the emergency stop, twist the appropriate E-STOPswitch clockwise to release it. The pedestal and head can now be powered upand targeted - see Chapter 2 for operating procedures.1-2 User Manual