SP-2000/X-Y AutoCam™ Pedestal - Vinten Radamec

SP-2000/X-YMaintenance And RepairThe East Wheel Cover1. Use a 3/16” hex key to remove the direction indicator for the East wheel.Screws (5/16” hex)Screw on the side(1/4” hex)Direction Indicator(3/16” hex)2. Use a 1/4” hex key to remove the screw in the side of the East wheel cover.3. Use a 5/16” hex key to remove the two screws in the top of the East cover.4. Have an assistant close by to disconnect the E-Stop switch harness andbumper sensor harness. Carefully lift the cover up and off a few inches, disconnectthe E-Stop harness connector and the bumper sensor connector5. Remove the cover.User Manual 4-11