SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec

More documents

Recommendations

Info

SP-2000/X-YMaintenance And RepairThe West Wheel Cover1. Use a 3/16” hex key to remove the direction indicator for the West wheel.Screw on the side(1/4” hex)Screws (5/16” hex)Direction Indicator(3/16” hex)2. Use a 1/4” hex key to remove the screw in the side of the West wheel cover.3. Use a 5/16” hex key to remove the two screws in the top of the West cover.4. Have an assistant close by to disconnect the E-Stop switch harness andbumper sensor harness. Carefully lift the cover up and off a few inches, disconnectthe E-Stop harness connector and the bumper sensor connector5. Remove the cover.4-10 User Manual
SP-2000/X-YMaintenance And RepairThe East Wheel Cover1. Use a 3/16” hex key to remove the direction indicator for the East wheel.Screws (5/16” hex)Screw on the side(1/4” hex)Direction Indicator(3/16” hex)2. Use a 1/4” hex key to remove the screw in the side of the East wheel cover.3. Use a 5/16” hex key to remove the two screws in the top of the East cover.4. Have an assistant close by to disconnect the E-Stop switch harness andbumper sensor harness. Carefully lift the cover up and off a few inches, disconnectthe E-Stop harness connector and the bumper sensor connector5. Remove the cover.User Manual 4-11
Page 1 and 2:
SP-2000/X-YAutoCam PedestalOperatio
Page 3 and 4:
Critical Data For SP-2000/X-YMass (
Page 5 and 6:
WarrantyVinten, Incorporated (Vinte
Page 7 and 8:
Table Of ContentsSP-2000/X-Y Pedest
Page 9 and 10:
Table Of ContentsCustomer Responsib
Page 11 and 12:
1 Safety & IntroductionUser Manual
Page 13 and 14:
SP-2000/X-YSafety & IntroductionOth
Page 15 and 16:
SP-2000/X-YSafety & IntroductionCAU
Page 17 and 18:
SP-2000/X-YSafety & IntroductionWar
Page 19 and 20:
SP-2000/X-YSafety & IntroductionHOW
Page 21 and 22:
SP-2000/X-YSafety & IntroductionThi
Page 23 and 24:
SP-2000/X-YSafety & IntroductionThe
Page 25 and 26: SP-2000/X-YSafety & Introductionbig
Page 27 and 28: SP-2000/X-YSafety & IntroductionTyp
Page 29 and 30: 2 OperationUser Manual 2-1
Page 31 and 32: SP-2000/X-YOperationOrientationAs a
Page 33 and 34: SP-2000/X-YOperation2. Press the St
Page 35 and 36: SP-2000/X-YOperationAfter clearing
Page 37 and 38: SP-2000/X-YOperationPedestal Active
Page 39 and 40: SP-2000/X-YOperationTargetingTarget
Page 41 and 42: 3 InstallationUser Manual 3-1
Page 43 and 44: SP-2000/X-YInstallationFloor Prepar
Page 45 and 46: SP-2000/X-YInstallation4. Using two
Page 47 and 48: SP-2000/X-YInstallation4. Plug the
Page 49 and 50: SP-2000/X-YInstallation4. Continue
Page 51 and 52: SP-2000/X-YInstallationMCB Controll
Page 53 and 54: SP-2000/X-YInstallation2. Connect t
Page 55 and 56: SP-2000/X-YInstallationFinishing Up
Page 57 and 58: SP-2000/X-YInstallationThis page le
Page 59 and 60: SP-2000/X-YInstallation3. Install a
Page 61 and 62: SP-2000/X-YInstallationTechflex Inc
Page 63 and 64: SP-2000/X-YInstallationThis page le
Page 65 and 66: SP-2000/X-YInstallationCrating The
Page 67 and 68: 4 Maintenance And RepairUser Manual
Page 69 and 70: SP-2000/X-YMaintenance And RepairOt
Page 71 and 72: SP-2000/X-YMaintenance And RepairTh
Page 73 and 74: SP-2000/X-YMaintenance And Repair
Page 75: SP-2000/X-YMaintenance And RepairRe
Page 81 and 82: SP-2000/X-YMaintenance And RepairNo
Page 83 and 84: SP-2000/X-YMaintenance And Repair3.
Page 87 and 88: SP-2000/X-YMaintenance And Repair6.
Page 89 and 90: SP-2000/X-YMaintenance And RepairWA
Page 93 and 94: SP-2000/X-YMaintenance And RepairIf
Page 97 and 98: SP-2000/X-YMaintenance And RepairBa
Page 99 and 100: SP-2000/X-YMaintenance And Repair10
Page 103 and 104: SP-2000/X-Y IndexNumerics4-Channel
Page 105 and 106: SP-2000/X-Y IndexTarget Sensor Cali
show all

SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec