SP-2000/X-Y AutoCam™ Pedestal - Vinten Radamec

CopyrightThe Vinten Inc. AutoCam User Manual is copyrighted with all rights reserved. Underthe copyright law, this manual may not be copied, in whole or in part, without writtenconsent from Vinten Inc.© 1995 - 2001 by Vinten Inc.Disclosure Statement - AutoCam SystemThis document contains information proprietary to Vinten Inc. Except by writtenauthorization from Vinten Inc., the information contained in this document shall not,in whole or in part, be disclosed to third parties, reproduced for any purpose, or usedexcept for evaluation, operation and maintenance of equipment supplied by VintenInc. or Vinten Broadcast.Manual OutlineThis manual covers the installation, operation and maintenance of the AutoCam SP-2000/X-Y robotic pedestal. See Chapter 1 for a detailed description of the contents ofthis manual.Product Serial NumbersVinten AutoCam products are marked with unique serial numbers that include a 2digit product identifier, a 4 digit serial number and a 2 character revision code. Theformat is AABBBBXXCD where:AABBBBProduct Identifier - 80 for the SP-2000/X-YSerial numberXX Reserved for future use - currently 00CDPrimary revision status - 0, 1, 2, 3 etc.Secondary revision status - 0, A, B, C etc.This manual is applicable to products that have serial numbers 80xxxx0020 wherexxxx may be any 4 digit number.AutoCam TM , Vinten Inc. TM and Lubricated Friction (LF TM ) are trademarks ofVinten Inc. or Vinten Broadcast Limited.Specifications and features are subject to change without prior notice.(021601)vi