SP-2000/X-Y AutoCam⢠Pedestal - Vinten Radamec
SP-2000/X-Y AutoCam⢠Pedestal - Vinten Radamec
SP-2000/X-Y AutoCam⢠Pedestal - Vinten Radamec
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SP</strong>-<strong>2000</strong>/X-YSafety & IntroductionWARNING! - Always set the column to minimum height, turnpower off and engage the two locking pins in the base of thecolumn before removing the camera or other payload equipmentfrom the head. Or, discharge the gas from the pedestal.Locking Pin InstalledWARNING - NEVER work directly under the camera if thecolumn is raised. In the unlikely event that the gas pressuresupporting the column is lost, the head and payload may dropquickly.CAUTION - NEVER stand under the payload when youpower up the pedestal or switching from Local to Remote onthe MCB Controller. The column may change height quickly.CAUTION - NEVER attach cables to the head or camerawhich could pull the pedestal over if it is moved with the columnextended.1-4 User Manual