SP-2000/X-Y AutoCam™ Pedestal - Vinten Radamec

SP-2000/X-YInstallationRemoving The PayloadWARNING: ALWAYS lower the column to its minimumheight, power down the pedestal and install the locking pinsbefore removing all or part of the payload. Or, discharge thepressure in the pedestal (see Discharging The Pedestal earlierin this chapter). This will prevent column from risingunexpectedly and causing injury and/or damage.CAUTION: NEVER try to raise or lower the column if thelocking pins are installed, You will cause serious mechanicaland/or electrical damage.Refer to the documentation for the payload equipment and the User Manual forthe pan/tilt head for specific instructions.3-22 User Manual