SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec

More documents

Recommendations

Info

SP-2000/X-YSafety & IntroductionTypical ApplicationsThe SP-2000/X-Y servo pedestal will typically be installed with the HS-2010Ror HS-2010MH pan & tilt head. Up to eight pedestals and heads can be controlledremotely with the AutoCam ACP-8000P touchscreen controller. Communicationbetween the head and the controller is by RS-422 data.Refer to the User Manuals for your specific heads and controller for more information.ACP-8000P SystemIn systems with one or more (up to eight) servo pedestals, the ACP-8000P controlleris used as shown belowThe distance between the controller and rack mounted power supply for the dataconnection can be up to a maximum of 5000 ft. (1500 m). The power/data connectionfrom the power supply to the pedestal can be up to a maximum of 180 ft(55 m). The power and data is looped from the pedestal up to the head.1-16 User Manual
SP-2000/X-YSafety & IntroductionTypical System ConfigurationThe diagram below illustrates the interconnection of a typical AutoCam system.In this example, two ACP controllers are installed to provide backup and/orworkload sharing. The 2x1 Data Selector routes the selected data lines to thepower supplies and optional CCU interface.User Manual 1-17
Page 1 and 2: SP-2000/X-YAutoCam PedestalOperatio
Page 3 and 4: Critical Data For SP-2000/X-YMass (
Page 5 and 6: WarrantyVinten, Incorporated (Vinte
Page 7 and 8: Table Of ContentsSP-2000/X-Y Pedest
Page 9 and 10: Table Of ContentsCustomer Responsib
Page 11 and 12: 1 Safety & IntroductionUser Manual
Page 13 and 14: SP-2000/X-YSafety & IntroductionOth
Page 15 and 16: SP-2000/X-YSafety & IntroductionCAU
Page 17 and 18: SP-2000/X-YSafety & IntroductionWar
Page 19 and 20: SP-2000/X-YSafety & IntroductionHOW
Page 21 and 22: SP-2000/X-YSafety & IntroductionThi
Page 23 and 24: SP-2000/X-YSafety & IntroductionThe
Page 25: SP-2000/X-YSafety & Introductionbig
Page 29 and 30: 2 OperationUser Manual 2-1
Page 31 and 32: SP-2000/X-YOperationOrientationAs a
Page 33 and 34: SP-2000/X-YOperation2. Press the St
Page 35 and 36: SP-2000/X-YOperationAfter clearing
Page 37 and 38: SP-2000/X-YOperationPedestal Active
Page 39 and 40: SP-2000/X-YOperationTargetingTarget
Page 41 and 42: 3 InstallationUser Manual 3-1
Page 43 and 44: SP-2000/X-YInstallationFloor Prepar
Page 45 and 46: SP-2000/X-YInstallation4. Using two
Page 47 and 48: SP-2000/X-YInstallation4. Plug the
Page 49 and 50: SP-2000/X-YInstallation4. Continue
Page 51 and 52: SP-2000/X-YInstallationMCB Controll
Page 53 and 54: SP-2000/X-YInstallation2. Connect t
Page 55 and 56: SP-2000/X-YInstallationFinishing Up
Page 57 and 58: SP-2000/X-YInstallationThis page le
Page 59 and 60: SP-2000/X-YInstallation3. Install a
Page 61 and 62: SP-2000/X-YInstallationTechflex Inc
Page 63 and 64: SP-2000/X-YInstallationThis page le
Page 65 and 66: SP-2000/X-YInstallationCrating The
Page 67 and 68: 4 Maintenance And RepairUser Manual
Page 69 and 70: SP-2000/X-YMaintenance And RepairOt
Page 71 and 72: SP-2000/X-YMaintenance And RepairTh
Page 73 and 74: SP-2000/X-YMaintenance And Repair
Page 75 and 76: SP-2000/X-YMaintenance And RepairRe
Page 77 and 78:
SP-2000/X-YMaintenance And RepairTh
Page 79 and 80:
Page 81 and 82:
SP-2000/X-YMaintenance And RepairNo
Page 83 and 84:
SP-2000/X-YMaintenance And Repair3.
Page 85 and 86:
Page 87 and 88:
SP-2000/X-YMaintenance And Repair6.
Page 89 and 90:
SP-2000/X-YMaintenance And RepairWA
Page 91 and 92:
Page 93 and 94:
SP-2000/X-YMaintenance And RepairIf
Page 95 and 96:
Page 97 and 98:
SP-2000/X-YMaintenance And RepairBa
Page 99 and 100:
SP-2000/X-YMaintenance And Repair10
Page 101 and 102:
Page 103 and 104:
SP-2000/X-Y IndexNumerics4-Channel
Page 105 and 106:
SP-2000/X-Y IndexTarget Sensor Cali
show all

SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec

Create successful ePaper yourself

Delete template?

Save as template?

SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec