SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec

More documents

Recommendations

Info

SP-2000/X-YOperationUsing The MCB ControllerThe MCB controller provides local control at the pedestal, with or without anACP-8000P controller connected.LOCREMROTATELocal/RemoteThe MCB must always be in Remote (top switch to the right) when the pedestalis powered up. In Remote, the controller has control of the pedestal operation.In Local mode (top switch to the left), the MCB joystick controls the pedestal.DriveWith the Rotate switch to the right, push the joystick up/down/left/right or anyangle in between to drive the pedestal in the desired direction. Regardless of thepan angle of the head, up/down on the joystick drives the pedestal in the Northand South direction. Right/left on the joystick drives the pedestal East and West.RotateWith the Rotate switch to the left, push the joystick left/right to rotate the pedestalin place.Raising/Lowering The ColumnTwist the joystick knob to raise or lower the column. Do not raise or lower thecolumn until it has been pressurized and balanced - see Chapter 3.2-10 User Manual
SP-2000/X-YOperationTargetingTargeting the pedestal is fundamental to the operation of the AutoCam system.However, targeting is initiated at the controller and cannot be performed at thepedestal itself. Installing the targets, measuring their positions and the targetingprocedure are described in Chapter 3 of the User Manual for your controller -for example the ACP-8000P.User Manual 2-11
Page 1 and 2: SP-2000/X-YAutoCam PedestalOperatio
Page 3 and 4: Critical Data For SP-2000/X-YMass (
Page 5 and 6: WarrantyVinten, Incorporated (Vinte
Page 7 and 8: Table Of ContentsSP-2000/X-Y Pedest
Page 9 and 10: Table Of ContentsCustomer Responsib
Page 11 and 12: 1 Safety & IntroductionUser Manual
Page 13 and 14: SP-2000/X-YSafety & IntroductionOth
Page 15 and 16: SP-2000/X-YSafety & IntroductionCAU
Page 17 and 18: SP-2000/X-YSafety & IntroductionWar
Page 19 and 20: SP-2000/X-YSafety & IntroductionHOW
Page 21 and 22: SP-2000/X-YSafety & IntroductionThi
Page 23 and 24: SP-2000/X-YSafety & IntroductionThe
Page 25 and 26: SP-2000/X-YSafety & Introductionbig
Page 27 and 28: SP-2000/X-YSafety & IntroductionTyp
Page 29 and 30: 2 OperationUser Manual 2-1
Page 31 and 32: SP-2000/X-YOperationOrientationAs a
Page 33 and 34: SP-2000/X-YOperation2. Press the St
Page 35 and 36: SP-2000/X-YOperationAfter clearing
Page 37: SP-2000/X-YOperationPedestal Active
Page 41 and 42: 3 InstallationUser Manual 3-1
Page 43 and 44: SP-2000/X-YInstallationFloor Prepar
Page 45 and 46: SP-2000/X-YInstallation4. Using two
Page 47 and 48: SP-2000/X-YInstallation4. Plug the
Page 49 and 50: SP-2000/X-YInstallation4. Continue
Page 51 and 52: SP-2000/X-YInstallationMCB Controll
Page 53 and 54: SP-2000/X-YInstallation2. Connect t
Page 55 and 56: SP-2000/X-YInstallationFinishing Up
Page 57 and 58: SP-2000/X-YInstallationThis page le
Page 59 and 60: SP-2000/X-YInstallation3. Install a
Page 61 and 62: SP-2000/X-YInstallationTechflex Inc
Page 63 and 64: SP-2000/X-YInstallationThis page le
Page 65 and 66: SP-2000/X-YInstallationCrating The
Page 67 and 68: 4 Maintenance And RepairUser Manual
Page 69 and 70: SP-2000/X-YMaintenance And RepairOt
Page 71 and 72: SP-2000/X-YMaintenance And RepairTh
Page 73 and 74: SP-2000/X-YMaintenance And Repair
Page 75 and 76: SP-2000/X-YMaintenance And RepairRe
Page 81 and 82: SP-2000/X-YMaintenance And RepairNo
Page 83 and 84: SP-2000/X-YMaintenance And Repair3.
Page 87 and 88: SP-2000/X-YMaintenance And Repair6.
Page 89 and 90:
SP-2000/X-YMaintenance And RepairWA
Page 91 and 92:
SP-2000/X-YMaintenance And RepairTh
Page 93 and 94:
SP-2000/X-YMaintenance And RepairIf
Page 95 and 96:
Page 97 and 98:
SP-2000/X-YMaintenance And RepairBa
Page 99 and 100:
SP-2000/X-YMaintenance And Repair10
Page 101 and 102:
Page 103 and 104:
SP-2000/X-Y IndexNumerics4-Channel
Page 105 and 106:
SP-2000/X-Y IndexTarget Sensor Cali
show all

SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec

Create successful ePaper yourself

Delete template?

Save as template?

SP-2000/X-Y AutoCamâ¢ Pedestal - Vinten Radamec