SP-2000/X-Y AutoCam™ Pedestal - Vinten Radamec

SP-2000/X-YInstallation4. Using two or more people, lift the ramp out of the top of the crate. Insertthe two pins at the end of the ramp into the mating holes in the base of thecrate. Unfold the ramp onto the floor.5. Remove the four sides of the crate and set them aside.6. Using two or more people, lift the brace frame up and off the pedestal andset it aside.Ramp Attached To Base Of Crate (3 Side Panels Removed)7. Remove and set aside any other items (for example the head mountingscrews, MCB joystick controller, targets etc.) that were packed inside thepedestal crate.User Manual 3-5