Operating instructions - EWM Hightec Welding GmbH

Design and functionMIG/MAG welding5.9.1.1 MIG/MAG standard weldingFigure 5-4Item Symbol Description 01 Welding torch2 Welding torch hose package3 19-pole connection socket (analogue)For connecting analogue accessory components (remote control, welding torch controllead, etc.)4 Central connection for welding torch (Euro)Integrated welding current, shielding gas and torch trigger5 Workpiece67"-" welding current connection socket• MIG/MAG welding: Workpiece connectionWelding current cable, polarity selectionWelding current to central connection/torch. Permits polarity selection for MIG/MAGwelding.• Standard applications: Connection for "+" welding current connectionsocket• Insert the central plug for the welding torch into the central connector and screw together with crownnut.• Insert the plug on the workpiece lead into the "-" welding current connection socket and lock.• Welding current lead, insert polarity selection into the "+" welding current connection socket and lock.Where applicable:• Lock connecting nipples of the cooling water tubes into the corresponding quick connect couplings:Return line red to quick connect coupling, red (coolant return) andsupply line blue to quick connect coupling, blue (coolant supply).Only MIG/MAG torches with special functions (additional control lead):• Insert the torch control lead plug into the 19-pole connection socket and lock in place.099-005234-EW50116.04.201235