Operating instructions - EWM Hightec Welding GmbH

More documents

Recommendations

Info

Design and functionMMA welding5.11 MMA weldingCAUTIONRisk of being crushed or burnt.When replacing spent or new stick electrodes• Switch off machine at the main switch• Wear appropriate safety gloves• Use insulated tongs to remove spent stick electrodes or to move welded workpieces and• Always put the electrode holder down on an insulated surface.5.11.1 Connecting the electrode holder and workpiece leadFigure 5-49Item Symbol Description 01 Workpiece2 Electrode holder3 Connection socket, “-” welding current4 Connection socket, “+” welding current• Insert cable plug of the electrode holder into either the "+" or "-" welding current connection socket andlock by turning to the right.• Insert cable plug of the workpiece lead into either the "+" or "-" welding current connection socket andlock by turning to the right.NOTEPolarity depends on the instructions from the electrode manufacturer given on theelectrode packaging.84099-005234-EW50116.04.2012
Design and functionMMA welding5.11.2 Welding task selectionOperating Action Result DisplayelementMaterialSelect JOB listGasMaterialWire 1 x(LEDGasis on)JOB-LISTWireSet JOB number.Wait 3s until the setting has been adopted.m/min3,5 4 5 6 7 8 9 10 11 1213141532,5162181,5201220,524m/minWelding current is setSetpoint settingDYN- +m/minSelect arcforcing welding parameterLED for the button is on.Arcforcing setting for electrode types:(Setting range -40 to 40)Negative values: RutileValues around zero:BasicPositive values: Cellulose099-005234-EW50116.04.201285
Page 1 and 2:
Operating instructionsWelding machi
Page 4 and 5:
ContentsNotes on the use of these o
Page 6 and 7:
ContentsNotes on the use of these o
Page 8 and 9:
Safety instructionsExplanation of i
Page 10 and 11:
Safety instructionsGeneralWARNINGEx
Page 12 and 13:
Safety instructionsGeneralCAUTIONEM
Page 14 and 15:
Safety instructionsTransport and in
Page 16 and 17:
Intended useApplications3 Intended
Page 18 and 19:
Machine description - quick overvie
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Design and functionGeneral5 Design
Page 28 and 29:
Design and functionWelding torch co
Page 30 and 31:
Design and functionMains connection
Page 32 and 33:
Design and functionShielding gas su
Page 34 and 35: Design and functionMIG/MAG welding5
Page 40 and 41: Design and functionMIG/MAG welding
Page 42 and 43: Design and functionMIG/MAG weldingO
Page 44 and 45: Design and functionMIG/MAG weldingA
Page 50 and 51: Design and functionMIG/MAG weldingN
Page 52 and 53: Design and functionMIG/MAG weldingS
Page 54 and 55: Design and functionMIG/MAG weldingL
Page 70 and 71: Design and functionMIG/MAG weldingD
Page 72 and 73: Design and functionMIG/MAG weldingE
Page 78 and 79: Design and functionTIG welding5.10.
Page 80 and 81: Design and functionTIG weldingNon-l
Page 82 and 83: Design and functionTIG weldingLatch
Page 86 and 87: Design and functionMMA welding5.11.
Page 88 and 89: Maintenance, care and disposalGener
Page 90 and 91: Maintenance, care and disposalDispo
Page 92 and 93: Rectifying faultsError messages (po
Page 94 and 95: Rectifying faultsResetting JOBs (we
Page 96 and 97: Rectifying faultsVent coolant circu
Page 98 and 99: Technical dataPhoenix 401 Concept p
Page 100 and 101: Replaceable partsWire feed rollers1
Page 102 and 103: Fülldraht / Flux-CoredMassivdraht
show all

Operating instructions - EWM Hightec Welding GmbH

Create successful ePaper yourself

Delete template?

Save as template?