Operating instructions - EWM Hightec Welding GmbH

More documents

Recommendations

Info

Design and functionMIG/MAG weldingOperatingelement-1235710- V+0 1235710DYN- +m/min5.9.8.1 Superpulses+ActionResultArc length correction rotary dialArc length correction from -10 V to +10 V in 24 increments. Correctiondepends on the values preselected on the power source.Select dynamic setting.(Signal light DYN is on)Set dynamic. (Setting range 40 to -40)40: Arc hard and narrow.-40: Arc soft and wide.m/minFigure 5-10Display5.9.8.2 Burn-backSetting/selectionSelects super pulsesSwitches function on or off.Switch onSwitching on machine functionSwitch offSwitching off machine functionm/minFigure 5-11DisplaySetting/selectionmenu burn backSet burn backParameter setting (setting range 0 to 499)Back-burn set too high: large drops developing on the wire electrode result in poorignition properties or the wire electrode sticking to the welding nozzle.Back-burn set too low: Wire electrode sticks in the molten pool42099-005234-EW50116.04.2012
Design and functionMIG/MAG welding5.9.9 MIG/MAG operating pointThe operating point (welding output) is specified using the principle of MIG/MAG one-dial operation, i.e.the user need only specify the operating point by setting the required wire speed, for example, and thedigital system will calculate the optimum values for welding current and voltage (operating point).The operating point setting can also be specified using the accessory components such as the remotecontrol, welding torch, etc.5.9.9.1 Selecting the display unitAMPVOLTPROGHOLDConceptFigure 5-12The operating point (welding performance) can be displayed as the welding current, material thickness orwire speed.Operating Action ResultelementSwitching the display between:n xAMP Welding currentMaterial thicknessWire speed099-005234-EW50116.04.201243
Page 1 and 2: Operating instructionsWelding machi
Page 4 and 5: ContentsNotes on the use of these o
Page 6 and 7: ContentsNotes on the use of these o
Page 8 and 9: Safety instructionsExplanation of i
Page 10 and 11: Safety instructionsGeneralWARNINGEx
Page 12 and 13: Safety instructionsGeneralCAUTIONEM
Page 14 and 15: Safety instructionsTransport and in
Page 16 and 17: Intended useApplications3 Intended
Page 18 and 19: Machine description - quick overvie
Page 26 and 27: Design and functionGeneral5 Design
Page 28 and 29: Design and functionWelding torch co
Page 30 and 31: Design and functionMains connection
Page 32 and 33: Design and functionShielding gas su
Page 34 and 35: Design and functionMIG/MAG welding5
Page 40 and 41: Design and functionMIG/MAG welding
Page 44 and 45: Design and functionMIG/MAG weldingA
Page 50 and 51: Design and functionMIG/MAG weldingN
Page 52 and 53: Design and functionMIG/MAG weldingS
Page 54 and 55: Design and functionMIG/MAG weldingL
Page 70 and 71: Design and functionMIG/MAG weldingD
Page 72 and 73: Design and functionMIG/MAG weldingE
Page 78 and 79: Design and functionTIG welding5.10.
Page 80 and 81: Design and functionTIG weldingNon-l
Page 82 and 83: Design and functionTIG weldingLatch
Page 84 and 85: Design and functionMMA welding5.11
Page 86 and 87: Design and functionMMA welding5.11.
Page 88 and 89: Maintenance, care and disposalGener
Page 90 and 91: Maintenance, care and disposalDispo
Page 92 and 93:
Rectifying faultsError messages (po
Page 94 and 95:
Rectifying faultsResetting JOBs (we
Page 96 and 97:
Rectifying faultsVent coolant circu
Page 98 and 99:
Technical dataPhoenix 401 Concept p
Page 100 and 101:
Replaceable partsWire feed rollers1
Page 102 and 103:
Fülldraht / Flux-CoredMassivdraht
show all

Operating instructions - EWM Hightec Welding GmbH

Create successful ePaper yourself

Delete template?

Save as template?