Operating instructions - EWM Hightec Welding GmbH
Operating instructions - EWM Hightec Welding GmbH
Operating instructions - EWM Hightec Welding GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Design and functionMIG/MAG welding5.9.14.3 Example, tack welding (non-latched)IP AFigure 5-30tBasic parametersParameter Meaning / explanation Setting rangeGASstr Gas pre-flow time 0.0s to 20.0sGASend: Gas post-flow time 0.0s to 20sRUECK Wire burn-back length 2 to 500"P A" main programParameter Meaning / explanation Setting rangeSetting the wire speed5.9.14.4 Example, aluminium tack welding (non-latched special)IP STARTFigure 5-31P APENDtBasic parameters<strong>Welding</strong> parameter Meaning / explanationSetting rangeGASstr Gas pre-flow time 0.0s to 20.0sGASend: Gas post-flow time 0.0s to 20.0sRUECK Wire burn-back length 2 to 500"P START" start program<strong>Welding</strong> parameter Meaning / explanationSetting rangeDVstart Wire speed 0% to 200%Ustart Arc length correction -9.9V to +9.9Vtstart Duration 0.0s to 20s"P A" main program<strong>Welding</strong> parameter Meaning / explanationSetting the wire speed"P END" end-crater program<strong>Welding</strong> parameter Meaning / explanationSetting rangeSetting rangeDVend Wire speed 0% to 200%Uend Arc length correction -9.9V to +9.9Vtend Duration 0.0s to 20s099-005234-EW50116.04.201263
Change language