Operating instructions - EWM Hightec Welding GmbH

More documents

Recommendations

Info

Safety instructionsExplanation of icons2.2 Explanation of iconsSymbolDescriptionPressDo not pressTurnSwitch0lSwitch off machine0lSwitch on machineENTER (enter the menu)NAVIGATION (Navigating in the menu)EXIT (Exit the menu)Time display (example: wait 4s/press)Interruption in the menu display (other setting options possible)Tool not required/do not useTool required/use8099-005234-EW50116.04.2012
Safety instructionsGeneral2.3 GeneralDANGERElectric shock!Welding machines use high voltages which can result in potentially fatal electric shocksand burns on contact. Even low voltages can cause you to get a shock and lead toaccidents.• Do not touch any live parts in or on the machine!• Connection cables and leads must be free of faults!• Switching off alone is not sufficient!• Place welding torch and stick electrode holder on an insulated surface!• The unit should only be opened by specialist staff after the mains plug has been unplugged!• Only wear dry protective clothing!• Wait for 4 minutes until the capacitors have discharged!Electromagnetic fields!The power source may cause electrical or electromagnetic fields to be produced whichcould affect the correct functioning of electronic equipment such as IT or CNC devices,telecommunication lines, power cables, signal lines and pacemakers.• Observe the maintenance instructions! (see Maintenance and Testing chapter)• Unwind welding leads completely!• Shield devices or equipment sensitive to radiation accordingly!• The correct functioning of pacemakers may be affected (obtain advice from a doctor ifnecessary).Do not carry out any unauthorised repairs or modifications!To avoid injury and equipment damage, the unit must only be repaired or modified byspecialist, skilled persons!The warranty becomes null and void in the event of unauthorised interference.• Appoint only skilled persons for repair work (trained service personnel)!WARNINGRisk of accidents if these safety instructions are not observed!Non-observance of these safety instructions is potentially fatal!• Carefully read the safety information in this manual!• Observe the accident prevention regulations in your country.• Inform persons in the working area that they must observe the regulations!Risk of injury due to radiation or heat!Arc radiation results in injury to skin and eyes.Contact with hot workpieces and sparks results in burns.• Use welding shield or welding helmet with the appropriate safety level (depending on theapplication)!• Wear dry protective clothing (e.g. welding shield, gloves, etc.) according to the relevantregulations in the country in question!• Protect persons not involved in the work against arc beams and the risk of glare usingsafety curtains!099-005234-EW50116.04.20129
Page 1 and 2: Operating instructionsWelding machi
Page 4 and 5: ContentsNotes on the use of these o
Page 6 and 7: ContentsNotes on the use of these o
Page 10 and 11: Safety instructionsGeneralWARNINGEx
Page 12 and 13: Safety instructionsGeneralCAUTIONEM
Page 14 and 15: Safety instructionsTransport and in
Page 16 and 17: Intended useApplications3 Intended
Page 18 and 19: Machine description - quick overvie
Page 26 and 27: Design and functionGeneral5 Design
Page 28 and 29: Design and functionWelding torch co
Page 30 and 31: Design and functionMains connection
Page 32 and 33: Design and functionShielding gas su
Page 34 and 35: Design and functionMIG/MAG welding5
Page 40 and 41: Design and functionMIG/MAG welding
Page 42 and 43: Design and functionMIG/MAG weldingO
Page 44 and 45: Design and functionMIG/MAG weldingA
Page 50 and 51: Design and functionMIG/MAG weldingN
Page 52 and 53: Design and functionMIG/MAG weldingS
Page 54 and 55: Design and functionMIG/MAG weldingL
Page 56 and 57: Design and functionMIG/MAG weldingL
Page 58 and 59:
Design and functionMIG/MAG weldingL
Page 60 and 61:
Design and functionMIG/MAG weldingS
Page 62 and 63:
Design and functionMIG/MAG welding5
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Design and functionMIG/MAG weldingD
Page 72 and 73:
Design and functionMIG/MAG weldingE
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Design and functionTIG welding5.10.
Page 80 and 81:
Design and functionTIG weldingNon-l
Page 82 and 83:
Design and functionTIG weldingLatch
Page 84 and 85:
Design and functionMMA welding5.11
Page 86 and 87:
Design and functionMMA welding5.11.
Page 88 and 89:
Maintenance, care and disposalGener
Page 90 and 91:
Maintenance, care and disposalDispo
Page 92 and 93:
Rectifying faultsError messages (po
Page 94 and 95:
Rectifying faultsResetting JOBs (we
Page 96 and 97:
Rectifying faultsVent coolant circu
Page 98 and 99:
Technical dataPhoenix 401 Concept p
Page 100 and 101:
Replaceable partsWire feed rollers1
Page 102 and 103:
Fülldraht / Flux-CoredMassivdraht
show all

Operating instructions - EWM Hightec Welding GmbH

Create successful ePaper yourself

Delete template?

Save as template?