12.07.2015 Views

Click to Download User Manual. - Home

Click to Download User Manual. - Home

Click to Download User Manual. - Home

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

13 Installing accessoriesYour machine is a full-featured model that has been optimized <strong>to</strong> meetmost of your printing needs. Recognizing that each user may havedifferent requirements, however, Samsung makes several accessoriesavailable <strong>to</strong> enhance your machine’s capabilities.This chapter includes:• Precautions <strong>to</strong> take when installing accessories• Installing a memory DIMM• Replacing the Stapler• Enabling Fax feature after installing the fax option kit2 Open the control board cover by grasping it and slide <strong>to</strong>ward you.1Precautions <strong>to</strong> take when installing accessoriesDisconnect the power cordNever remove the control board cover while the power is being suppliedon.To avoid the possibility of an electrical shock, always disconnect thepower cord when installing or removing ANY internal or externalaccessories.Discharge static electricityThe control board and internal accessories (network interface card ormemory DIMM) are sensitive <strong>to</strong> static electricity. Before installing orremoving any internal accessories, discharge static electricity from yourbody by <strong>to</strong>uching something metal, such as the metal back plate on anydevice plugged in<strong>to</strong> a grounded power source. If you walk round beforefinishing the installation, repeat this procedure <strong>to</strong> discharge any staticelectricity again.Installing a memory DIMMYour machine has a dual in-line memory module (DIMM) slot. Use thisDIMM slot <strong>to</strong> install additional memory.Your machine has 256 MB of memory which can be expanded <strong>to</strong> 384 MB.The order information is provided for optional memory DIMM.(Page 12.1)1 control board cover3 Completely open the latch on each side of the DIMM slot. Removethe preinstalled memory DIMM.4 Take out a new memory DIMM from the plastic bag.5 Holding the memory DIMM by the edges, align the notches on thememory DIMM with the grooves on the memory DIMM slot.121 latch2 memory DIMM1 Turn the machine off and unplug all cables from the machine.NoteThe notches and grooves illustrated above may not matchthose on an actual DIMM and its slot.13.1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!