Click to Download User Manual. - Home

Message Meaning Suggested solutionsMessage Meaning Suggested solutionsFax Memory islow.Available faxmemory is now1MB.Delete the receivedfax data in thememory to securememory. Call forservice.GUI to MCBCommunicationsFaultA communicationerror has occurred.Turn the machine offand turn it on again. Ifthe problem persists,please call forservice.Feed Jam at MPTrayFeed Jam at Tray 1Feed Jam at Tray 2Feed Jam at Tray 3Feed Jam at Tray 4Finisher DuplexJamFinisher InterfaceErrorFinisher Jam 0Finisher Jam 1Finisher Jam 2Finisher StackerFullFront Jogger FaultFuser errorFuser High ErrorFuser Low ErrorPaper Misfed frommulti-purpose trayPaper misfed fromtrayPaper jammed in thestacker.Communicationerror has occurredbetween the stackerand the machine.Paper jammed in thestacker.Paper jammed in thestacker exit part.The stacker is full ofprintouts.Front Jogger is notoperating.There is a problemin the fuser unit.Clear the jam.(Page 11.5)Clear the jam.(Page 11.2 andpage 11.3)Open the stackerdoor and removejammed paper bylowering guide 1a or1b.Turn the machine offand turn it on again. Ifthe problem persists,call for service.Open the stackerdoor and removejammed paper bylowering guide 1a or1b.Pull jammed paperfrom the stacker exit.Remove printoutsfrom the stacker.Open the finisherdoor and clear anyjammed paper (ifthere is). If this errormessage shows onthe screen again,cycle power. If theproblem persists, callfor service.Unplug the powercord and plug it backin. If the problem stillpersists, please callfor service.Install Developer-Drum CartridgeInstall StapleCartridgeInstall TonerCartridgeInvalid DrumcartridgeInvalid TonerCartridgeIP address conflictJam at FuserThe drum cartridgeis not installed, orthe CRUM(ConsumerReplaceable UnitMonitor) in thecartridge is notconnected.The staple cartridgeis not installed.The toner cartridgeis not installed or theCRUM (ConsumerReplaceable UnitMonitor) in thecartridge is notproperly connected.The drum cartridgeyou have installed isnot for yourmachine.The toner cartridgeyou have installed isnot for yourmachine.The IP address isused in other placeelsewhere.Paper has jammedin the fuser area.Install the drumcartridge. If it isalready installed, tryto reinstall the drumcartridge.If the problempersists, please callfor service.Install the staplecartridge following thesteps explained onthe back of thefinisher door.(Page 13.2) If youwant to continue theprint job anddisregard of this errormessage, go toAdmin Setting toadjust the option.(Page 9.2)Try to reinstall thetoner cartridge.Install a Samsunggenuinedrumcartridge, designedfor your machine.Install a Samsunggenuinetonercartridge, designedfor your machine.Check the IP addressor obtain a new IPaddress.Clear the jam.(Page 11.5)Fuser unit error11.10