Click to Download User Manual. - Home

1 Open the multi-purpose tray and unfold the multi-purpose trayextension, as shown.4 Squeeze the multi-purpose tray paper width guides and adjust themto the width of the paper. Do not force too much, or the paper will bebent, which will result in a paper jam or skew.2 If you are using paper, flex or fan the edge of the paper stack toseparate the pages before loading.For transparencies, hold them by the edges and avoid touching theprint side. Oils from your fingers can cause print quality problems.3 Load the paper.NoteDepending on the media type you are using, keep the followingloading guidelines:• Envelopes: Flap side down and with the stamp area on the topleft side.• Transparencies: Print side up and the top with the adhesivestrip entering the machine first.• Labels: Print side up and top short edge entering the machinefirst.• Preprinted paper: Design side up with the top edge toward themachine.• Card stock: Print side up and the short edge entering themachine first.• Previously printed paper: Previously printed side down with anuncurled edge toward the machine.5 After loading paper, set the paper type and size for the multipurposetray. See page 4.8 for copying and faxing or the Softwaresection for PC-printing.NoteThe settings made from the printer driver override thesettings on the control panel.6 After printing, fold the multi-purpose tray extension and close themulti-purpose tray.NoteIf you want to load the used paper, place the paper with theprinted side facing down.4.7