Click to Download User Manual. - Home

AuthenticationOptionDescriptionThis feature lets you control and lock all outgoing data, or change thepassword.1 Press Machine Setup on the control panel.2 Press Admin Setting. When the login message pops up, then enterpassword and press OK.3 Press the Setup tab > Authentication.AuthenticationModeOptionNetworkAccountingForeign DeviceInterfaceDescriptionIt enables the authenticationmode which can be used forJob Accounting Plug-in theSyncThru Web AdminService.When you install the optionalFDI kit, select On to activate it.• Job Timer: If there is notenough credit, you can set themachine to cancel a job rightaway or wait a designatedamount of time for a deposit.• Print Job Control: When it isenabled, the both computerprinting and copying arepossible since the creditremains. With Disable, onlythe copy printing job needsthe credit. (which means acomputer printing a report or afax job needs no credits)• Inhibit Services: When nocredit is left, the machinedisables the copy job only withCopy Only. With All Service,scanning service and copy jobare disabled.AuthenticationMode(Continue)Foreign DeviceInterface(Continue)NoAuthenticationModeChange Admin. PasswordOptional Service• Internal Credits: It is usedwhen you cancel the job orwhen the job is cancelled bythe device due to insufficientcredits (coin) or is canceled byuser’s request. If you selectEnable, the machine depositsa credit equal to the numberof sheets that did not print outcorrectly, then it prints next jobfor free (for the amountdeposited). With Disable,even if you cancel the printingjob, the machine includesjammed paper in the countand the cost of printing.• Image Counter: Depends onwhether the machine countsblank white pages.It disables AuthenticationMode.You can change the passwordfor the Admin Settingauthentication.When you want to add the optional features for this machine, you have toinstall the optional kit and then set the machine to enable and activatethose features. Follow the next steps to enable those features.1 Press Machine Setup on the control panel.2 Press Admin Setting. When the login message pops up, then enterpassword and press OK.3 Press the Setup tab > Optional Service.OptionN/W ScanDescriptionIf you are not using the network scan feature,select Disable, then the Scan icon on thedisplay will be grayed out.9.6