Click to Download User Manual. - Home

3 Adjust the document settings in the Image tab and the Basic tab.4 Press the Advanced tab > Mailbox > Send to Remote.5 Enter Remote Fax No, Mailbox No., and Passcode. All these fieldare filled with information from the receiver.2 Press Admin Setting. When the login message pops up, enterpassword and press OK. (Page 3.3)3 Press the Setup tab > Fax Setup.4 Press down arrow on the right side.5 Press Toll Save.6 Press On.6 Press OK.Printing a report after sending a faxYou can set the machine to print a report whether a fax transmission issuccessfully completed or not.NoteThe detailed information is available in advanced setuppart. (Page 9.7)1 Press Machine Setup on the control panel.2 Press Admin Setting. When the login message pops up, enterpassword and press OK. (Page 3.3)3 Press the Print/Report tab > Report > Fax Report > Fax SendReport.4 Press On.7 Press Start Time and set the start date and time with left/rightarrows.8 Press OK.9 Press End Time and set the end date and time with left/right arrows.10 Press OK.11 Press OK.Adding documents to a reserved delay fax jobYou can add additional documents to the delayed fax job which is savedin memory.1 Press Machine Setup on the control panel.2 Press Admin Setting. When the login message pops up, enterpassword and press OK. (Page 3.3)3 Press the Setup tab > Fax Setup.4 Press down arrow on the right side.5 Press Send Batch.5 Press OK.Sending a fax in toll save time6 Press On.7 Press OK.• When you send a fax, if a fax number is same as the number indelay fax, the machine asks whether you want to add moredocuments to reserved delay fax.You can set the machine to send a fax in toll save time to save atelephone fee. If you send a fax after setting this feature, fax data will bestored in machine's memory and the machine will start to send fax in tollsave time.1 Press Machine Setup on the control panel.6.10