Click to Download User Manual. - Home

If the installation window does not appear, click Start > Run. TypeX:\Setup.exe, replacing “X” with the letter which represents yourdrive and click OK.• If you do not see your printer on the list, click Update to refresh thelist, or select Add TCP/IP Port to add your printer to the network.To add the printer to the network, enter the port name and the IPaddress for the printer.To verify your printer’s IP address or the MAC address, print aNetwork Configuration page. (Page 10.1)• To find a shared network printer (UNC Path), select SharedPrinter [UNC] and enter the shared name manually or find ashared printer by clicking the Browse button.Note• If you are not sure of IP address, contact your networkadministrator or print network information. (Page 10.1)• If you cannot find your machine in network, please turn offthe firewall and click Update.• Select a language from the drop-down list, if necessary.6 After the installation is finished, a window appears asking you toprint a test page and to register yourself as a user of Samsungprinters in order to receive information from Samsung. If you sodesire, select the corresponding checkbox(es) and click Finish.4 Select Typical installation for a network printer, and then clickNext.5 The list of printers available on the network appears. Select theprinter you want to install from the list and then click Next.NoteIf your printer does not work properly after the installation,try to reinstall the printer driver. See Software section.Machine's basic settingsAfter installation is complete, you may want to set the machine's defaultsettings. Check the next explanation if you would like to set or changevalues.Setting the authentication passwordTo set your machine up or change the settings, you have to login. Tochange password, follow the next steps.1 Press Machine Setup on the control panel.2 Press Admin Setting.3.3