Click to Download User Manual. - Home

• Staple, Landscape: Adds a single staple to all of your landscapeorientedoutput.1 Place a single original face down on the scanner glass. (Page 4.1)NoteThe Staple feature is available with an optional stacker &stapler. (Page 12.1)Selecting the type of original (Text/Photo)Press the Basic tab and select an appropriate original type.• Text: Use for originals containing mostly text.• Text/Photo: Use for originals with mixed text and photographs.• Photo: Use when originals are photographs.NoteThe original must be placed on the scanner glass to use thisfeature.2 Press Copy from the Main screen.3 Press the Advanced tab > ID Copy.4 Press Start on the control panel.Then the machine starts scanning the front side.5 Turn the original over and place it on the scanner glass.Changing the darknessThis defines the degree of darkness. Use left/right arrows to change thelevel of light/dark in the printouts.6 Press Start on the control panel to begin copying.Using special copy featuresOn the Advanced tab or the Image tab of the Copy screen, you canselect specific copy features.ID card copyingThe machine prints one side of the original on the upper half of the paperand the other side on the lower half without reducing the size of theoriginal. This feature is helpful for copying a small-sized item, such as abusiness card.Note• If the original is larger than the printable area, some portionsmay not be printed.• If this option is grayed out, select the Duplex option to 1 -> 1Sided, the Output option to Collated.2-up or 4-up copying (N-up)The machine reduces the size of the original images and prints 2 or 4pages onto one sheet of paper.1 22-up copying 4-up copying1 Load the originals, face up, in the DADF. (Page 4.1)NoteThe originals must be loaded in the DADF to use this feature.2 Press Copy from the Main screen.5.4