Click to Download User Manual. - Home

Installing Software for NetworkPrinting4 Select Typical installation for a network printer. ClickNext.When you connect your printer to a network, you must firstconfigure the TCP/IP settings for the printer. After you haveassigned and verified the TCP/IP settings, you are ready toinstall the software on each computer on the network.You can install the printer software using the typical or custommethod.Typical InstallationThis is recommended for most users. All components necessaryfor printer operations will be installed.1 Make sure that the printer is connected to your networkand powered on. For details about connecting to thenetwork, see the supplied printer’s User’s Guide.2 Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM should automatically run, and an installationwindow appears.If the installation window does not appear, click Start andthen Run. Type X:\Setup.exe, replacing “X” with theletter which represents your drive and click OK.5 The list of printers available on the network appears.Select the printer you want to install from the list and thenclick Next.• If you do not see your printer on the list, click Update torefresh the list, or select Add TCP/IP Port to add yourprinter to the network. To add the printer to thenetwork, enter the port name and the IP address for theprinter.3 Click Next.• If necessary, select a language from the drop-down list.To verify your printer’s IP address or the MAC address,print a Network Configuration page.• To find a shared network printer (UNC Path), selectShared Printer [UNC] and enter the shared namemanually or find a shared printer by clicking the Browsebutton.NOTE: If you cannot find your machine in network, pleaseturn off the firewall and click Update.8Installing Printer Software in Windows