Operating Instructions - Snap-on Equipment

PC Meters/GraphOrder—Specifies which measurements to include in the strip chart and in whatorder.Add button—To add an item to the Order list, select the item in theMeter Selection list and press Add.Remove button—To remove an item from the Order list, select theitem in the Order list and press Remove.Up button—To move an item up in the Order list, select the item in theOrder list and press Up until the item is in the desired position.Down button—To move an item down in the Order list, select the itemin the Order list and press Down until the item is in the desiredposition.Trace Color—Sets the color of the trace for each item being plotted. To changethe color, select the item in the Order list and double-click the Trace Color box.Choose the new color from the color selector.Scale Reading by x—Allows you to scale the actual reading of an item by a factorof x. The default factor is 1. For example, if you select HC in the Order list andchange the scale factor to 10, the instantaneous value is multiplied by 10 when thepoint is plotted on the strip chart. Put in max Y divided by max reading expected.Manual Meters / Strip Chart ResultsThe results window allows you to view and print the results obtained. When youselect Save on the Test Actions menu of the Manual Meters or Strip Chart window,the results are displayed on the Single Save tab of the Test Results window asshown in Figure 3C-5.Figure 3C-5: Single Save Test Results3C-8