13.07.2015 Views

Operating Instructions - Snap-on Equipment

Operating Instructions - Snap-on Equipment

Operating Instructions - Snap-on Equipment

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

General MaintenanceAs NeededNO x SensorReplace the NO x sensor when calibrati<strong>on</strong> fails, indicating a new NO x sensor isneeded. To replace the NO x sensor, c<strong>on</strong>tact EquiServ. See New NOx Sensor,page 3G-5.✓ If a warning message appears regarding the NO x cell voltage or lowoutput at the end of the Gas Calibrati<strong>on</strong> procedure, the cell may need tobe replaced.O 2 SensorIf the oxygen readings vary widely from what they should be when measuringclean air (20.9%) or the readings do not drop to a low number when testing severalcatalyst-equipped vehicles, then the oxygen sensor may need replacing. Toreplace the O 2 sensor, c<strong>on</strong>tact EquiServ.Miscellaneous• Clean the test leads periodically with waterless hand cleaner and wipe dry.• Wipe down the case periodically with a damp cloth.• Inspect all hoses, probes, cables and c<strong>on</strong>necti<strong>on</strong>s for damage. Replace as needed.✓ Do not use damaged cables.Accessories and Opti<strong>on</strong>sStandardThe FGA analyzer can be purchased in standard c<strong>on</strong>figurati<strong>on</strong>s with or without apocket PC. Opti<strong>on</strong>al accessories are available as listed below.Standard c<strong>on</strong>figurati<strong>on</strong>s of the FGA analyzer include a versi<strong>on</strong> without the pocketPC and a versi<strong>on</strong> with the pocket PC. Both versi<strong>on</strong>s and the included items aredescribed below.Item<str<strong>on</strong>g>Snap</str<strong>on</strong>g>-<strong>on</strong> Flexible 5-Gas Analyzer, Standard AccessoriesIncludes:293-0001 <str<strong>on</strong>g>Snap</str<strong>on</strong>g>-<strong>on</strong> Flexible Gas AnalyzerZEEEA300A <str<strong>on</strong>g>Operating</str<strong>on</strong>g> <str<strong>on</strong>g>Instructi<strong>on</strong>s</str<strong>on</strong>g> ManualAL 413-0006 13.2 Volt DC power supply and cableAL 410-0040 Package of 3 replacement filtersAL 410-0409 6' Yellow Power supply to gas analyzer cableAL 410-0411 DC Power cable with cigar lighter adapterAL 710-0227 Battery power adapter with alligator clipsAL 410-0169 Clear polypropylene drain/exhaust tube with male fitting (L<strong>on</strong>g)AL 410-0215 Clear polypropylene drain/exhaust tube with male fitting (Short)AL 410-0027 Exhaust Sample hose with handle and retaining chainAL 410-0162 Exhaust Sample Flex probeAL 410-0048 Leak Check Adapter (Mounted <strong>on</strong> Flex Probe)610-0011 MODIS RS232 CableAL 410-0077 Loop Back Tester<str<strong>on</strong>g>Snap</str<strong>on</strong>g>-<strong>on</strong> Flexible 5-Gas Analyzer, Color Pocket PC Display, Other AccessoriesIncludes:AL 410-0206 Compaq iPAQ 3830 Pocket PC Display UnitAL 410-0110 Pocket PC storage/carrying case (mounted to FGA analyzer)4-2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!