Operating Instructions - Snap-on Equipment

Pocket PC MaintenancePocket PC MaintenanceThe pocket PC software provides water trap / filter maintenance warnings, batterymaintenance tools, and a set of error and status messages.Water Trap / Filter Maintenance WarningsTo assist in proper maintenance of the FGA, the pocket PC software displays aFilter Warning Message, as shown in Figure 2G-33. This message appears at setintervals (see Days Between Filter Check page 2G-27) to remind you to inspectand if necessary replace the sample system filter.Figure 2G-33: Filter Service WarningAfter you inspect or change the filter, you must reset the filter warning message.To reset the filter warning message,1. Tap the Maintenance button on the Main menu.— The Maintenance menu opens.2. Press the Setup button.— The Setup menu opens.3. Press the General Setup button.— The General Setup screen opens.2G-26