Operating Instructions - Snap-on Equipment

Pocket PC MaintenanceGeneral SetupThe General button allows you to access General Setup and specify details aboutthe bench module, gas com port, RPM and other items.Bench Type—In the future, FGA may provide a choice of gas bench modules.— Default is <strong>Snap</strong>-on FGA-5.Comm Port—Specifies the communications port that connects the pocketPC to the analyzer.— Default is Comm 1.✓ If you change either the gas bench module or the gascommunications port, FGA verifies that communication to thedevice is working properly when you select the OK button.Bluetooth—Specifies that the communications port being used is aBluetooth port. This should be checked only when using the Bluetooth forcommunication.— Default is off.✓ If you select the Bluetooth option, this warning message displays.Figure 2G-17: Bluetooth Warning ScreenRecord Rate—Configures the interval rate (in seconds) at which data isrecorded in meters, strip chart and bar chart— Default is 1 second.Touch Screen—Specifies whether the software will start/stop a recordingwith a touch of the screen in meters, strip chart and bar chart. If checked,the unit starts recording when you tap anywhere on the screen.— Default is no checkmark.Demo Mode—Configures whether the FGA pocket PC communicates tothe gas analyzer in real time or generates random readings. EnablingDemo Mode is often useful for training or demonstration purposes.— Default is no checkmark (off).2G-12