Operating Instructions - Snap-on Equipment

Pocket PC MaintenanceStandardsThe Standards command on the pocket PC provides a set of standards with whichto compare results obtained from the vehicle being tested. This makes it possibleto assess whether the vehicle would pass or fail a state I/M Test.The Standards command displays the standards available in the FGA software.FGA measures and compares emissions levels against limits. The standards usedare EPA Guidance Standards to be as universal as possible for all tests andvarying state test programs.To review the Standards,1. Press the Maintenance button on the main menu.— The Maintenance menu displays.2. Choose Setup.— The Setup menu displays.3. Choose Standards.— The Standards screen displays. From the drop down menus, select theTest Type, Year and use the keyboard to input the Weight.✓ Set the Test Type value to the default value desired when viewingrecording results on the Results screen. For example, if you setTest Type to ASM 5015 on the Standards screen, ASM 5015 willbe the default test type displayed when viewing recording resultson the Results screen.After changing the Test Type, Year or Weight, you must select theApply button to load the corresponding standards.The corresponding standards display. A set of standards is shown inFigure 2G-21 and Figure 2G-22.1 2Figure 2G-21: Standards Screens: (1) TSI and (2) Idle2G-17