Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pocket PC MaintenanceIf the readings are not within allowable limits, the following screendisplays.Figure 2G-7: Not Within Allowable Limits ScreenMake sure you have attached the correct calibrati<strong>on</strong> gas bottle, the bottlevalve is open and the values are correct.10. To Retry the verificati<strong>on</strong> press Retry. To c<strong>on</strong>tinue calibrati<strong>on</strong> withoutcorrecting the calibrati<strong>on</strong> problem, or if you are absolutely certain thevalues entered match the bottle and the bottle has adequate pressure,press Ignore. To stop the calibrati<strong>on</strong> press Abort.When the gas calibrati<strong>on</strong> has passed, the following screen displays.Figure 2G-8: Gas Calibrati<strong>on</strong> Passed Screen11. Turn off the gas calibrati<strong>on</strong> bottle.12. Disc<strong>on</strong>nect the bottle from the analyzer.13. When the gas calibrati<strong>on</strong> has successfully completed, press C<strong>on</strong>tinueto c<strong>on</strong>tinue using FGA.2G-5
Change language