Operating Instructions - Snap-on Equipment

Pocket PC ResultsChange StandardsCutpoints are based on vehicle year and standard test types listed inthe Test Type list. When you choose a test from the Test Type list box,you will see the obtained results compared to the cutpoints for the testtype you selected. The Test Type list box allows you to view cutpointsfor the Idle, Two Speed Idle, ASM2525, EPA IM240 and ASM 5015Tests.The Result column for Recordings displays either a P(ass) or F(ail) toindicate that the values at the particular time interval passed or failedthe generic standards for that test type.When viewing results from a TSI/Idle Test, values that display in greentype are passing values (when compared to the cutpoints) and valuesthat display in red type are failing values. These values havecorresponding cutpoints listed in the Cutpoint column.The Change Standards button at the lower end of the Results screensallows you to change the Year and Weight to be used for obtaining thestandards, as well as the Test Type.Pressing the Change Standards button displays the ChangeStandards screen.Figure 2F-3: Change Standards ScreenIn this screen the cutpoints are based on the Two Speed Idle Test,vehicle year 2002, and weight 3000. The TSI Idle and TSI High boxeslist the cutpoints for those settings. Press the Apply button to acceptthese standards and use them as the cutpoints for your test results.2F-3