Operating Instructions - Snap-on Equipment

Pocket PC MaintenanceDiagnosticsService utilities include diagnostics and setup. Diagnostics provides a means ofanalyzing and diagnosing problems in the analyzer. Setup allows you to specifybasic settings.Diagnostics is a process of diagnosing problems that may occur within the gasanalyzer. The diagnostics window in the FGA software is not intended to functionas a measurement tool.✓ If you experience problems, select Diagnostics for information that mayhelp to determine the cause of the difficulty.To begin Diagnostics,1. Press the Maintenance button on the Main menu.— The Maintenance menu displays.2. Press the Setup button.— The Setup menu screen opens.3. Press the Unit Diagnostics button.— The Diagnostic screen opens.The lower edge of the screen contains the following buttons:• Bench• Board• System ID• Comm TestBench DiagnosticsFigure 2G-25: Bench Diagnostics ScreenThe Bench Diagnostics screen displays the status of the gas bench, showing avariety of conditions. Please contact EquiServ for assistance in diagnosingproblems with the gas analyzer.2G-20