Operating Instructions - Snap-on Equipment

Pocket PC Software InstallationInstallation Verification6. When you receive the “Please check your mobile device screen to see ifadditional steps are necessary to complete the installation” PC message,select OK to finish the PC portion of the installation process.7. At this time, you will see the pocket PC installing the FGA application onthe pocket PC. If you are re-installing the software or are installing asoftware upgrade and receive the “<strong>Snap</strong>-on FGA is already installed. Reinstall?”message, select OK to continue with the installation. If promptedby the pocket PC to overwrite existing file(s), choose Yes to All.Additionally, if you receive a message saying “A file may be in use orROM…”, choose Ignore to continue.8. When the pocket PC installation has completed you will be returned to thepocket PC main window. Remove the CD-ROM from the PC and store in asafe location.1. Select the Start menu button followed by Programs and then FGA for thepocket PC selection. It will take some time (two minutes) to load. If thepocket PC is not connected to the FGA, a communications failure isdisplayed. This is normal.2. Select Agree after reading the Software License Agreement and check thebox in the lower left to prevent the agreement from being displayed in thefuture. This agreement is also in your operator’s manual for reference.3. The Main menu screen displays confirming installation. If you encounterproblems following these instructions, remove the FGA software using theWindows Remove Programs utility (Start > Settings > Systems tab) andthen reinstall it.Starting FGARead the manual that came with the pocket PC to learn how to use Windows CE.This FGA manual does not tell how to use standard Windows CE.To run the FGA software,1. Turn on the pocket PC using the button on the upper right.2. When the main screen appears, tap the word Start at the top left of thescreen.— The Start menu drops down.3. Select Programs and then FGA.— The FGA program begins to load. This could take a minute or more.✓ Alternatives for launching the FGA program can be found in thepocket PC manual.To keep the pocket PC charged, store in the base when not in use.• Some information is lost from the pocket PC if the batteries losetheir charge.• If the main battery and the backup battery become drained, theFGA software must be reinstalled.• FGA disappears off the Start menu if the batteries have died or theprogram will not load.2B-4