Operating Instructions - Snap-on Equipment

PC Other Functions3HThis chapter contains information about several analyzer functions not covered inother chapters, including:• Change Password, page 3H-1• About, page 3H-2• Exit, page 3H-2Change PasswordThe FGA PC software provides secure access to two of the more sensitive areasof the software, Diagnostics and Setup. The default password at installation is“STATION”, all uppercase letters. You are allowed to change the password at anytime, provided you know the current password.To change the password,1. Press the Shop Information button and choose Change Password from themenu.— The Service Password window opens.Figure 3H-1: Service Password Screen2. Enter the current password and press Continue.— The Change Password window opens.Figure 3H-2: Change Password Screen3. Enter the password in both input boxes.✓ The password— Must contain 8 characters— Can consist of any 8 characters— Is case sensitive4. Select OK to finalize the password change.✓ If you forgot the password, you must remove and reload the software.3H-1