Operating Instructions - Snap-on Equipment

PC Customer/VehicleFigure 3E-1: Customer/Vehicle Information ScreenEnter customer information on the left side and vehicle information on the rightside. Required fields include Last Name, Year, Engine Size, # Cylinders and GrossVehicle Weight Rating (GVWR). These fields are required to use Standards. Whenselecting New Customer, the city, state/province, and country default to thesettings entered in Shop Information, assuming that most customers are from thelocal area. If the new customer is not from the local area, change these fields toreflect the correct information.Any field with a down arrow shown along the right side has a pull-down list boxwith available selections to make entering information easier. The vehicle Makeand Model selection lists contain only a partial listing of available vehicles. If aparticular vehicle Make or Model is not listed, simply enter the information.Figure 3E-2: Customer Notes ScreenThe Notes button allows you to enter additional information about the customer orvehicle in the Customer Notes text area. See Figure 3E-2.When the customer and vehicle information is entered, press the OK button topermanently save the customer and vehicle information to the hard drive. Pressingthe OK button closes the Customer/Vehicle Information window and displays thecustomer name in the main screen information bar at the bottom. See Figure 3E-3.This is now the active customer.3E-2