26.03.2017 Views

Materials for engineering, 3rd Edition - (Malestrom)

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Preface to the third edition<br />

The criterion I have adopted <strong>for</strong> discussing a specific material in this book<br />

is its commercial availability, rather than its being confined to a research and<br />

development laboratory. In the ten years since the appearance of the first<br />

edition of the book, a number of such <strong>engineering</strong> materials have appeared<br />

on the market and a number of these will be discussed in the pages below.<br />

I have also taken the opportunity of including a few topics of <strong>engineering</strong><br />

importance that were originally omitted. Typical examples are the phenomena<br />

of superplasticity and the Bauschinger Effect. The chapter on organic polymeric<br />

materials now includes a fuller introduction to the range of those commercially<br />

available, and their typical applications.<br />

The suggested reading lists at the end of chapters have been updated<br />

where necessary, as has the Appendix devoted to a review of the sources of<br />

material property data (though the latter is essentially a moving target and so<br />

can never be fully comprehensive!).<br />

I continue to appreciate with gratitude the support and encouragement of<br />

my colleagues notably that of Professor George Smith, FRS, <strong>for</strong> allowing me<br />

access to the facilities of the Department of <strong>Materials</strong> at the University of<br />

Ox<strong>for</strong>d.<br />

John W. Martin

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!