Materials for engineering, 3rd Edition - (Malestrom)

Table 3.3 Typical mechanical properties of some wrought aluminium alloys
Alloy Condition Density Young’s Proof UTS Elongation
(Mg m –3 ) modulus stress (MPa) % in 50 mm)
(GPa) (MPa)
Al–4.5Cu–1.5Mg–0.6Mn Peak aged 2.77 73 395 475 10
(2024)
Al–1.25 Mn (3103) Annealed 2.74 69 65 110 40
Work hardened 185 200 7
Al–2Mg–0.3Mn (5251) Annealed 2.69 70 60 180 20
Work hardened 215 270 4
Al–0.5Mg –0.5Si (6063) Peak aged 2.70 71 210 245 20
Al–5.6Zn–2.5Mg– Peak aged 2.80 72 500 570 11
1.6Cu–0.25Cr (7075)
Al–2.5Li–1.3Cu– Peak aged 2.55 77 436 503 5
0.95Mg–0.1Zr (8090)