Materials for engineering, 3rd Edition - (Malestrom)

Recommendations

Info

Materials for engineering Third edition J. W. Martin Woodhead Publishing and Maney Publishing on behalf of The Institute of Materials, Minerals & Mining CRC Press Boca Raton Boston New York Washington, DC W OODHEAD PUBLISHING LIMITED Cambridge England
Woodhead Publishing Limited and Maney Publishing Limited on behalf of The Institute of Materials, Minerals & Mining Woodhead Publishing Limited, Abington Hall, Abington, Cambridge CB1 6AH, England www.woodheadpublishing.com Published in North America by CRC Press LLC, 6000 Broken Sound Parkway, NW, Suite 300, Boca Raton, FL 33487, USA First published 1996. Second edition published 2002 by Maney Publishing for The Institute of Materials Third edition published 2006, Woodhead Publishing Limited and CRC Press LLC © Woodhead Publishing Limited, 2006 The author has asserted his moral rights. This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. Reasonable efforts have been made to publish reliable data and information, but the author and the publishers cannot assume responsibility for the validity of all materials. Neither the author nor the publishers, nor anyone else associated with this publication, shall be liable for any loss, damage or liability directly or indirectly caused or alleged to be caused by this book. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming and recording, or by any information storage or retrieval system, without permission in writing from Woodhead Publishing Limited. The consent of Woodhead Publishing Limited does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific permission must be obtained in writing from Woodhead Publishing Limited for such copying. Trademark notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation, without intent to infringe. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library. Library of Congress Cataloging in Publication Data A catalog record for this book is available from the Library of Congress. Woodhead Publishing Limited ISBN-13: 978-1-84569-157-8 (book) Woodhead Publishing Limited ISBN-10: 1-84569-157-1 (book) Woodhead Publishing Limited ISBN-13: 978-1-84569-160-8 (e-book) Woodhead Publishing Limited ISBN-10: 1-84569-160-1 (e-book) CRC Press ISBN-10: 0-8493-8780-9 CRC Press order number: WP8780 The publishers’ policy is to use permanent paper from mills that operate a sustainable forestry policy, and which has been manufactured from pulp which is processed using acid-free and elementary chlorine-free practices. Furthermore, the publishers ensure that the text paper and cover board used have met acceptable environmental accreditation standards. Typeset by Replika Press Pvt Ltd, India Printed by TJ International, Padstow, Cornwall, England
Page 1 and 2: Materials for engineering Third edi
Page 3: Related titles: Solving tribology p
Page 7 and 8: vi Contents 3.4 Degradation of meta
Page 10: Preface to the third edition The cr
Page 14: Preface to the first edition This t
Page 17 and 18: xvi Introduction Young’s modulus,
Page 20 and 21: 1 Structure of engineering material
Page 22 and 23: Structure of engineering materials
Page 24 and 25: 1.2 Microstructure Structure of eng
Page 52: 1.4 Further reading Structure of en
Page 55 and 56:
38 Materials for engineering Stress
Page 57 and 58:
40 Materials for engineering The BE
Page 59 and 60:
42 Materials for engineering presen
Page 61 and 62:
44 Materials for engineering the ca
Page 63 and 64:
46 Materials for engineering 2.5.2
Page 65 and 66:
48 Materials for engineering tough
Page 67 and 68:
50 Materials for engineering d/dc (
Page 69 and 70:
52 Materials for engineering releas
Page 71 and 72:
54 Materials for engineering a know
Page 73 and 74:
56 Materials for engineering Figure
Page 75 and 76:
58 Materials for engineering σ a
Page 77 and 78:
60 Materials for engineering 10 -2
Page 79 and 80:
62 Materials for engineering 10 4 E
Page 81 and 82:
64 Materials for engineering III a
Page 83 and 84:
66 Materials for engineering (a) (b
Page 86:
Part II Structure-property relation
Page 89 and 90:
72 Materials for engineering where
Page 91 and 92:
74 Materials for engineering 815 Te
Page 93 and 94:
76 Materials for engineering the te
Page 95 and 96:
78 Materials for engineering ageing
Page 97 and 98:
80 Materials for engineering behavi
Page 99 and 100:
82 Materials for engineering creep
Page 101 and 102:
84 Materials for engineering an imp
Page 103 and 104:
86 Materials for engineering Alumin
Page 105 and 106:
88 Materials for engineering Duralu
Page 107 and 108:
90 Materials for engineering Weight
Page 109 and 110:
92 Materials for engineering β α
Page 111 and 112:
94 Materials for engineering RT = r
Page 113 and 114:
96 Materials for engineering 1400 1
Page 115 and 116:
98 Materials for engineering Tensil
Page 117 and 118:
100 Materials for engineering At% A
Page 119 and 120:
102 Materials for engineering to th
Page 121 and 122:
104 Materials for engineering 1600
Page 123 and 124:
106 Materials for engineering Heat-
Page 125 and 126:
108 Materials for engineering The p
Page 127 and 128:
110 Materials for engineering featu
Page 129 and 130:
112 Materials for engineering pheno
Page 131 and 132:
114 Materials for engineering Tensi
Page 133 and 134:
Page 135 and 136:
118 Materials for engineering and c
Page 137 and 138:
120 Materials for engineering is sm
Page 139 and 140:
122 Materials for engineering polyb
Page 141 and 142:
124 Materials for engineering crack
Page 143 and 144:
126 Materials for engineering the l
Page 145 and 146:
128 Materials for engineering initi
Page 147 and 148:
130 Materials for engineering Wear
Page 149 and 150:
132 Materials for engineering I.J.
Page 151 and 152:
134 Materials for engineering Na -
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
140 Materials for engineering such
Page 159 and 160:
142 Materials for engineering Table
Page 161 and 162:
144 Materials for engineering O 2-
Page 163 and 164:
146 Materials for engineering resis
Page 165 and 166:
148 Materials for engineering 55% t
Page 167 and 168:
150 Materials for engineering to-ge
Page 169 and 170:
152 Materials for engineering large
Page 171 and 172:
154 Materials for engineering Up to
Page 173 and 174:
156 Materials for engineering stres
Page 175 and 176:
158 Materials for engineering 2500
Page 177 and 178:
160 Materials for engineering Amorp
Page 179 and 180:
162 Materials for engineering screw
Page 181 and 182:
164 Materials for engineering 2 3 4
Page 183 and 184:
Page 185 and 186:
168 Materials for engineering Tough
Page 187 and 188:
170 Materials for engineering Craze
Page 189 and 190:
172 Materials for engineering 10 Te
Page 191 and 192:
174 Materials for engineering by a
Page 193 and 194:
Page 195 and 196:
178 Materials for engineering the t
Page 197 and 198:
180 Materials for engineering energ
Page 199 and 200:
182 Materials for engineering 30 4.
Page 201 and 202:
184 Materials for engineering Atomi
Page 203 and 204:
186 Materials for engineering 6.2 M
Page 205 and 206:
188 Materials for engineering limes
Page 207 and 208:
190 Materials for engineering 6-20%
Page 209 and 210:
192 Materials for engineering Table
Page 211 and 212:
194 Materials for engineering runs
Page 213 and 214:
Page 215 and 216:
198 Materials for engineering agree
Page 217 and 218:
200 Materials for engineering 100 S
Page 219 and 220:
Page 221 and 222:
204 Materials for engineering σ f
Page 223 and 224:
206 Materials for engineering d = 2
Page 225 and 226:
208 Materials for engineering A fib
Page 227 and 228:
210 Materials for engineering But l
Page 229 and 230:
Page 231 and 232:
214 Materials for engineering envir
Page 234:
Part III Problems
Page 237 and 238:
220 Materials for engineering Liqui
Page 239 and 240:
222 Materials for engineering 3. Eq
Page 241 and 242:
224 Materials for engineering to a
Page 243 and 244:
226 Materials for engineering Chapt
Page 245 and 246:
228 Materials for engineering carbi
Page 248:
Appendix I Useful constants Symbol
Page 251 and 252:
234 Appendix II Fracture toughness
Page 254 and 255:
Appendix IV Sources of material pro
Page 256:
Sources of material property data 2
Page 260 and 261:
Index acrylics 160 adhesives 121 ad
Page 262 and 263:
Index 245 smart fibre 189 stiffness
Page 264 and 265:
Index 247 GPC (gel permeation chrom
Page 266 and 267:
Index 249 offset yield strength 39
Page 268 and 269:
Index 251 nitriding 83-4 normalisin
show all

Materials for engineering, 3rd Edition - (Malestrom)

Create successful ePaper yourself

Delete template?

Save as template?