12.12.2012 Views

Vacuum Technology Know How - Triumf

Vacuum Technology Know How - Triumf

Vacuum Technology Know How - Triumf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Model<br />

Penta 10<br />

Penta 20<br />

Penta 35<br />

Model<br />

Duo 2.5<br />

Duo 35<br />

Duo 120<br />

Duo 255<br />

www.pfeiffer-vacuum.net<br />

2.2.3.2 Two-stage rotary vane vacuum pumps<br />

Two-stage rotary vane pumps are suitable for applications in the low and medium vacuum<br />

ranges to a pressure of 10 -3 mbar. They are equipped with a vacuum safety valve that<br />

prevents oil contamination in the recipient. Integrated gas ballast means allow condensable<br />

vapors to be pumped down.<br />

PentaLine The pumps in the PentaLine series are characterized by their innovative drive concept. These<br />

pumps are powered by an electronically controlled brushless DC motor whose rotor sits<br />

directly on the rotor shaft of the pumping system. The pumps are supplied with alternating<br />

current via an electronic inverter. Voltage ranges of 100 – 120 volts and 200 – 240 volts can<br />

be selected by means of a selector switch. Their advantages include high energy efficiency<br />

with approximately 25 % lower energy consumption than conventional rotary vane pumps,<br />

and the pump’s hermetic seal without shaft feedthrough.<br />

If maximum pump performance is temporarily not required, the RPM of the pump can be<br />

reduced to the standby mode for additional energy savings of 50 %. Thanks to this new drive<br />

concept, it is possible to avoid the high startup currents that typically occur when the pump<br />

is cold, even with asynchronous motors. In addition to the above-mentioned gas ballast, the<br />

PentaLine pumps can be operated with temperature control to increase water vapor tolerance.<br />

The functions of Pump ON, Standby ON and Enhanced Water Vapor Tolerance ON can be<br />

selected by means of a PLC-compatible interface or a remote connection.<br />

Table 2.3: PentaLine performance data<br />

DuoLine <br />

Pumping Speed<br />

11 m³ / h<br />

22 m³ / h<br />

34 m³ / h<br />

Ultimate Pressure<br />

5 . 10 - 3 mbar<br />

5 . 10 - 3 mbar<br />

5 . 10 - 3 mbar<br />

Applications<br />

Ideally suited for turbopump pumping<br />

stations, analysis, industrial applications,<br />

research and development, coating<br />

DuoLine rotary vane vacuum pumps are powered by AC or DC motors, depending upon the<br />

size of the pump. In addition to the standard models, the following designs are also available:<br />

Magnetically coupled pumps (Duo M series) and corrosive gas pumps, both with and without<br />

magnetic coupling (Duo MC series).<br />

Table 2.4: DuoLine performance data<br />

Pumping Speed<br />

2.5 m³ / h<br />

35.0 m³ / h<br />

120.0 m³ / h<br />

250.0 m³ / h<br />

Ultimate Pressure<br />

6 . 10 - 3 mbar<br />

3 . 10 - 3 mbar<br />

6 . 10 - 3 mbar<br />

5 . 10 - 3 mbar<br />

Applications<br />

Suited for Turbopump pumping stations,<br />

analysis, research and development,<br />

coating<br />

Page 33<br />

<strong>Vacuum</strong><br />

<strong>Technology</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!