GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte
GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte
GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
English<br />
9) PWR_LED<br />
The PWR_LED connector is connected with the system power indicator to indicate whether the<br />
system is on/off. It will blink when the system enters suspend mode.<br />
<strong>GA</strong>-<strong>K8VM800M</strong>(-<strong>RH</strong>) Motherboard - 22 -<br />
1<br />
Pin No. Definition<br />
1 MPD+<br />
2 MPD-<br />
3 MPD-<br />
10) F_AUDIO (Front Audio Panel Connector)<br />
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.<br />
In order to utilize the front audio header, your chassis must have front audio connector. Also please<br />
make sure the pin assignments for the cable are the same as the pin assignments for the front audio<br />
header. To find out if the chassis you are buying support front audio connector, please contact your<br />
dealer. Please note, you can have the alternative of using front audio connector or of using rear audio<br />
connector to play sound.<br />
9<br />
1<br />
2<br />
10<br />
Pin No. Definition<br />
1 MIC<br />
2 GND<br />
3 MIC_BIAS<br />
4 POWER<br />
5 FrontAudio(R)<br />
6 Rear Audio (R)/ Return R<br />
7 NC<br />
8 No Pin<br />
9 FrontAudio (L)<br />
10 Rear Audio (L)/ Return L
Change language