GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte

A. Create Array:
Press Enter on Create Array item, you will see the screen as shown below.
����� Auto Setup For Performance
����� Array Mode RAID 0 (Striping)
����� Select Disk Drives
����� Block Size 64K
����� Start Create Process
VIA Tech. VT8237 SATA RAID BIOS Ver 2.41
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd
Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd
- 65 -
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
�����, ����� : Move to next item
Enter : Confirm the selection
ESC : Exit
Before create an Array, you have to set the array mode first. Select Array Mode and press Enter, use the
arrow key to select the array mode. The options are: RAID 0 for performance, RAID 1 for data protection,
and RAID SPAN for capacity.
����� Auto Setup For Data Security
����� Array RAID Mode 0 for RAID performance 0 (Striping)
����� Select RAID Disk 1 for Drives data protection
����� Block RAID Size SPAN 64Kfor
capacity
����� Start Create Process
VIA Tech. VT8237 SATA RAID BIOS Ver 2.41
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
�����, ����� : Move to next item
Enter : Confirm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd
Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd
Appendix
English