GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte
GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte
GA-K8VM800M / GA-K8VM800M-RH - visit site - Gigabyte
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
English<br />
2-1 Standard CMOS Features<br />
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software<br />
Standard CMOS Features<br />
Date (mm:dd:yy) Wed, May 11 2005<br />
Time (hh:mm:ss) 10:40:9<br />
� IDE Channel 0 Master [None]<br />
� IDE Channel 0 Slave [None]<br />
� IDE Channel 1 Master [None]<br />
� IDE Channel 1 Slave [None]<br />
� IDE Channel 2 Master [None]<br />
� IDE Channel 3 Master [None]<br />
Drive A [1.44M, 3.5"]<br />
Drive B [None]<br />
Floppy 3 Mode Suport [Disabled]<br />
Holt On [All, But Keyboard]<br />
Base Memory 640K<br />
Extended Memory 127M<br />
Total Memory 128M<br />
����: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help<br />
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults<br />
Date<br />
The date format is , , , .<br />
Week The week, from Sun to Sat, determined by the BIOS and is display only<br />
Month The month, Jan. Through Dec.<br />
Day The day, from 1 to 31 (or the maximum allowed in the month)<br />
Year The year, from 1999 through 2098<br />
Time<br />
The times format in . The time is calculated base on the 24-hour militarytime<br />
clock. For example, 1 p.m. is 13:00:00.<br />
IDE Channel 0/1 Master, Slave<br />
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.<br />
IDE Device Setup. You can use one of three methods:<br />
Auto Allows BIOS to automatically detect IDE devices during POST.(default)<br />
None Select this if no IDE devices are used and the system will skip the automatic<br />
detection step and allow for faster system start up.<br />
Manual User can manually input the correct settings<br />
Access Mode Use this to set the access mode for the hard drive. The four options are:<br />
CHS/LBA/Large/Auto(default:Auto)<br />
IDE Channel 2/3 Master<br />
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.<br />
Extended IDE Drive SATA devices setup. You can use one of two methods:<br />
Auto Allows BIOS to automatically detect SATA IDE devices during POST.<br />
(Default value)<br />
None Select this if no SATA IDE devices are used and the system will skip the<br />
automatic detection step and allow for faster system start up.<br />
Access Mode Use this to set the access mode for the hard drive. The two options are:<br />
Large/Auto(default:Auto)<br />
<strong>GA</strong>-<strong>K8VM800M</strong>(-<strong>RH</strong>) Motherboard - 30 -<br />
Item Help<br />
Menu Level�<br />
Change the day, month,<br />
year<br />
<br />
Sun. to Sat.<br />
<br />
Jan. to Dec.<br />
<br />
1 to 31 (or maximum<br />
allowed in the month)<br />
<br />
1999 to 2098
Change language