PCI TriManual-Intro - Sonnet Technologies

PCI TriManual-Chapters 1-13 3/30/01 5:55 PM Page 11
En
4. Identify the internal components of your computer.
Touch the power supply metal shielding
(Figure 2) to discharge any potential damaging
static electricity, and rotate the plastic processor
cover up and to the left (Figure 2).
5. Release the two latches (Figure 3) that lock the
internal assembly for the drive bay and power
supply in place.
processor cover
Figure 2; Figura 2
power supply
metal shielding
6. Lower the assembly support stand (Figure 4).
7. Rotate the internal assembly out of the case
(Figure 5). The support latch should lower and
lock in place.
internal assembly
Support Note: Remember to lift the
support latch when you close the internal
assembly because it will easily break.
Figure 3; Figura 3
support
stand
Figure 4; Figura 4
1-5
lower support latch (located
underneath assembly)
Figure 5; Figura 5