PCI TriManual-Intro - Sonnet Technologies

PCI TriManual-Chapters 1-13 3/30/01 5:55 PM Page 47
En
Crescendo card
2. Align the Crescendo card between the inner
card guides of the case with the card directly
over the Processor Card Slot (Figure 9). Gently
press down until the card is firmly seated in the
Processor Card Slot, taking care not to move or
wiggle the board as you install it into the slot.
3. Package the processor card you removed earlier
from the computer into the Crescendo’s antistatic
package and store it in a safe place.
Close Computer
1. Raise and rotate the internal assembly into the
computer’s case (Figure 10).
Processor Card Slot
Figure 9; Figura 9
internal assembly
2. Lock the internal assembly latches into their
original position (Figure 11).
3. Lift the computer to its upright position.
Figure 10; Figura 10
4. Replace the side panel onto the computer
(Figure 12).
5. Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
internal assembly
6. Affix the Powered by Sonnet label to the front of
your computer.
Figure 11; Figura 11
side panel
3-7
Figure 12; Figura 12